Stereo pairing only works between two speakers at most, and you would need to pair two identical speakers at the same time to create a stereo sound that distinguishes the L (left) and the R (right) channel separately.
To pair two soundCore Rave Neo 2 speakers together, follow the steps listed below.
1. Turn on 2 Rave Neo 2 speakers and connect either one to your device via Bluetooth.
2. Hold the Bluetooth button for 2 to 3 seconds on both speakers until they flash white.
3. Wait for 3 to 5 seconds until you hear a 'ding'. This means they are successfully paired.
4. Once paired, the primary speaker will show a steady blue light, while the secondary speaker will show a white light.
Note: Avoid having any electronic devices between both speakers, and make sure the distance between the two speakers is not greater than 16.4 ft / 5 m.
If you have additional questions, please contact us for further assistance.
