Stereo pairing only works between 2 speakers at most, and you would need to pair two identical speakers at the same time to create a stereo sound that distinguishes the L (left) and the R (right) channel separately.

To pair two soundCore Rave Party 2 speakers together, follow the steps listed below.

1. Turn on the two Rave Party 2 speakers and connect either one to your device via Bluetooth.

2. Hold the Bluetooth button for 2 to 3 seconds on both speakers until they flash white.

3. Wait for 3 to 5 seconds until you hear the chime. This means they are successfully paired.

4. Once paired, the primary speaker's Bluetooth shows a steady blue light, while the secondary speaker's Bluetooth shows a white light.

Note: Avoid having any electronic devices between both speakers, and make sure the distance between the two speakers is not greater than 16.4 ft / 5 m.

If you have additional questions, please contact us for further assistance.