1. How do I fix the "no-sound" issue when Rave Party 2 is paired with other PartyCast™ speakers?
Double press the PartyCast™ button on Rave Party 2.
2. What is the size and weight of Rave Party 2?
The size is 7.5 × 7.8 × 15.7 in (19.1 × 19.8 × 40 cm). The weight is 11.7 lb (5.3 kg).
3. What is Rave Party 2's frequency range?
Rave Party 2 plays sounds from 50 Hz to 20 kHz.
4.What is Rave Party 2's driver size?
The woofer is 4" and the two tweeters are 2" each.
5. How do I turn off Rave Party 2’s voice prompts?
1). Connect your device to Rave Party 2.
2). Open the Soundcore app.
3). Press the settings button in the top right corner to access more options.
4). Turn off prompt tones.
6. How do I reset Rave Party 2?
Turn on the speaker, then hold the Bluetooth and Volume + buttons simultaneously for 5 to 8 seconds.
7. I haven't used Rave Party 2 for a while. Why won't it turn on?
If you haven't charged or used Rave Party 2 in a long time, the battery may be depleted. Charge it for at least one hour before turning it on.
8. What is the water-resistance rating of Rave Party 2?
IPX4. Rave Party 2 can handle light water splashes.
9. How do I pair two Rave Party 2 speakers via TWS?
1) Turn on the two Rave Party 2 speakers and connect either one to your device via Bluetooth.
2) Hold the Bluetooth button for 2 to 3 seconds on both speakers until they flash white.
3) Wait for 3 to 5 seconds until you hear the chime. This means they are successfully paired.
4) Once paired, the primary speaker's Bluetooth shows a steady blue light, while the secondary speaker's Bluetooth shows a white light.
10. Can I use Rave Party 2 to charge other devices?
Yes, there is a USB-A port for charging other devices.
11. Can I connect a microphone to Rave Party 2 for karaoke?
Yes, connect your microphone to the MIC port on the back of the Rave Party 2.
12. How do I upgrade Rave Party 2’s firmware via the Soundcore app?
1) Open the Soundcore app and press Update Firmware.
2) Do not use your phone while the firmware is updating unless you’ve set the Soundcore app to run in the background.
3) Rave Party 2 will restart automatically after upgrading.
13. How do I pair Rave Party 2 speakers together wirelessly via PartyCast™?
You can wirelessly connect up to 100 Rave Party 2 speakers together via Partycast™. Follow these steps:
1) Connect a Rave Party 2 speaker with your smartphone or tablet as a master speaker.
2) Press the PartyCast™ button once on the master speaker and all the additional speakers to enter pairing mode. When successfully connected, you will hear a chime.
14. How long does it take to fully recharge Rave Party 2?
By using the original charger, you can recharge to 100% in 5.5 hours.
15. What should I do if the speaker and my phone fail to pair?
1) Confirm that the speaker is fully charged and not paired with other devices.
2) Forget all Bluetooth pairing records on your device.
3) Restart your speaker and your device.
4) Disable and enable Bluetooth on your device.
5) Reset the speaker.
6) Try to connect the speaker to another device.
16. Is a PIN or password needed when pairing Soundcore Rave Party 2 with a device?
A PIN or password is not needed when pairing a soundcore speaker with a device. If you encounter an issue during the pairing process, please try these steps:
1) Confirm that Rave Party 2 is fully charged and not connected to other devices.
2) Forget all Bluetooth pairing records on your device.
3) Restart Rave Party 2 and your device.
4) Disable and then enable Bluetooth on your device.
5) Reset Rave Party 2 by holding the Bluetooth and Volume+ buttons simultaneously for 5 to 8 seconds.
6) Connect Rave Party 2 to a different device.
17. How do I fix the Soundcore Rave Party 2 noise issues？
1) Confirm that the speaker is fully charged.
2) Reset the speaker.
3) Restart your speaker and your device.
4) Try connecting the speaker to another device. If possible, try using another app or audio source.
5) Ensure there are no physical objects interfering with the Bluetooth connection, such as a doorway or wall.
18. What should I do if Soundcore Rave Party 2 doesn't emit sound?
1) Confirm that the speaker is fully charged.
2) Reset the speaker.
3) Restart your speaker and the device it is paired with to test again.
4) Try connecting the speaker to a different device. If possible, try another app or audio source.
5) Make sure the volume on both the speaker and the paired device are turned up.
19. What should I do if the speaker is not charging?
1) Make sure the charger is working properly.
2) If you can still turn on your Rave Party 2, reset it.
3) Recharge the speaker for at least half an hour to prevent over-discharge.
20. How do I fix the "no-sound" issue when Rave Party 2 is paired with other PartyCast™ speakers?
Double press the PartyCast™ button on Rave Party 2.
If you have additional questions, please contact us for further assistance. Make sure to mention that you have tried the steps in this FAQ so our agents do not ask you to repeat these steps.
