If you're struggling to get enough volume from your soundcore Liberty 4 Pro earbuds when connected to your computer, don't worry! There are some tips to increase the volume and improve your listening experience. In this article, we'll explore some of the most effective methods to boost the volume of your soundcore Liberty 4 Pro earbuds when connected to a computer.

To fix this issue, please try the steps below:

1. Fully charge your earbuds and reset them by following these steps:

- Place the earbuds into the charging case and leave the case open.

- Press and hold the touch bar on the charging case for 5 seconds. A function menu will appear on the case's display. Slide to select Reset, then double-tap to confirm. After the reset is completed, a "Reset Successful" prompt will appear along with a single-tone chime, which will fade after 2 seconds. This confirms a successful reset.

Note: Ensure the earbuds are properly placed in the charging case and that the battery level is displayed on the charging case's screen for a successful reset.

2. Reconnect your earbuds and set the volume to maximum on both your computer and earbuds while playing audio.

3. Use a Q-tip with a small amount of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.