You can do a few things to improve the sound quality of soundcore AeroFit Pro Earbuds.
1. Set different EQ's in the app or customize EQ settings
In the Sound Effects of soundcore APP, It is recommended to use Spatial Audio for games and movies. Podcast EQ is recommended to be used when listening to Podcasts. Treble Booster is typically used to enhance the high-frequency sounds in music or audio. It is particularly useful in scenarios where the audio may seem dull or lacking in clarity. It is recommended to use the default EQ or custom EQ settings for music mode.
2. Reset earbuds as follows
- Place the earbuds in the charging case with the case open.
- Press the button on the charging case for 10 seconds until the LED indicators inside the case flash 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
3. Use a Q-tip with a bit of rubbing alcohol or a small, clean brush to gently clean the metal mesh filter.
4. Make sure the earbuds are worn at the correct angle.
Note: The advantage of open-sound devices is that they allow ambient noise to filter in, but the downside is that loud external sounds can overpower the audio from the earbuds, making it difficult to hear. You can adjust the volume of the earbuds accordingly for a better listening experience.
If you encounter any other issues or your issue has not been resolved, please contact us for further assistance.
