How Do I Pair Soundcore Select 2 Speakers Together?
PartyCast wirelessly synchronizes your music across an almost unlimited number of PartyCast-compatible speakers.
To pair speakers together, follow the steps listed below.
PartyCast - Primary Speaker
- Turn on Select 2 and connect it to your phone via Bluetooth.
- Once connected, press the Bluetooth button for at least 3-5 seconds until it begins flashing white.
- Connect additional speakers using the instructions below. The light on the primary speaker will flash at all times.
PartyCast - Secondary Speaker
- Turn on Select 2.
- Press the Bluetooth button for at least 3-5 seconds until it begins flashing white.
- Double-press the Bluetooth button to begin pairing to the primary speaker. Allow 2-5 seconds for the speakers to connect.
- Once the Bluetooth light turns solid white, the speaker is successfully connected.
Note: Avoid having any electronic devices between the two speakers and make sure the distance between the two speakers is not greater than 5 meters.
If you have additional questions, please contact us at service@soundcore.com for further assistance.


20 undefined
Soundcore Warranty Policy 67504 views 10 likes
How to Pair soundcore Speakers via PartyCast? 6655 views 1 likes
Payments & Vouchers FAQ 14203 views 1 likes
Anker soundcore app Introduction 34 views 1 likes
How to Disable Sound When Turning On/Off The Speaker 30 views 1 likes
How Do I Connect to the Anker soundcore app? 41 views 1 likes
soundcore Speakers with Multifunction Feature 7652 views 1 likes

A3125_Soundcore_Select_2_Manual

A3125_Soundcore_Select_2_Declaration_of_Conformity

A3125_Soundcore_Select_2_QSG
