What's in the box?
What is the playtime of Rave 3?
Rave 3 supports up to 12 hours of playtime at 50% volume with BassUp and light effects turned off. Battery life will vary depending on the content being played, custom EQs, volume level, etc.
How long does it take to charge Rave 3?
It takes around 6 hours to charge with a certified 5V/3A (15W) wall charger.
Do Rave 3 and the wireless microphone support IPX4?
No
How many drivers does Rave 3 have?
Rave 3 is equipped with a 6.5-inch woofer and three 2.5-inch full-range speakers.
What is the output of Rave 3?
160W
What Bluetooth version does Rave 3 use?
Version 5.3.
Does Rave 3 have an AUX jack?
Yes
Can Rave 3 be used with the soundcore app?
Yes, the Rave 3 can connect with the soundcore app. The soundcore app is available for both iOS and Android devices. You can install it from the Google Play Store or the Apple App Store.
Note: If you cannot find Rave 3 in the soundcore app, try uninstalling and reinstalling the app.
How do I turn on or change the light effects?
Click the light effect button to turn on or change the light effects. Hold the light effect button to turn off light effects.
After automatically shutting down due to low battery, why can't Rave 3 be turned on immediately when connected to a charger?
Based on the relevant requirements of the EU IEC62680 safety certification, Rave 3 has a charging protection mechanism in low battery conditions. When the adapter is plugged in, Rave 3 will start charging 24 seconds later. After charging for 2 minutes, it can be turned on normally.
How can I update Rave 3's firmware?
1. Open the soundcore app and press "Update Firmware."
2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
3. Rave 3 will restart automatically after updating.
How do I turn off the speaker's power on/off and Bluetooth connection notification sounds?
1. Open the soundcore app and enter the Rave 3 interface.
2. Click the Settings button in the upper right corner.
3. Go to "Speaker Prompts" to turn notification sounds on or off.
Does Rave 3 automatically shut down?
By default, the speaker will automatically turn off after 20 minutes of no audio signal input or connection. You can customize the auto power-off time in the soundcore app.
1. Open the soundcore app and go to the Rave 3 interface.
2. Click the Settings button in the upper right corner.
3. In the "Auto Power Off" section, you can select different auto power-off times or disable the auto power-off feature.
How do I adjust the volume of the microphone connected to Rave 3?
1. You can adjust the included microphone volume using the volume buttons on the microphone.
2. For the wired microphone, you can adjust the volume by using the wired mic volume control on the Rave 3 control panel.
Which direction increases wired mic volume and reverb on the Rave 3 control panel?
1. Turning clockwise increases the wired microphone volume/reverb intensity.
2. Turning counterclockwise decreases the wired microphone volume/reverb intensity.
How do I switch reverb modes?
Please use the soundcore app to switch between different reverb modes. The reverb knob on the Rave 3 control panel only supports reverb level adjustment.
How do I change the vocal enhancer mode on Rave 3?
You can use the soundcore app to change modes.
Can I adjust the AI vocal removal level?
Yes, you can adjust the level via the app, or using the AI vocal removal button on the wireless mic.
The indicator lights on the button correspond to the AI vocal removal level:
a. No lights—AI vocal removal is off.
b. One light—25% AI vocal removal.
c. Two lights—50% AI vocal removal.
d. Three lights: 75% AI vocal removal.
e. Four lights: 100% AI vocal removal.
You can also turn AI vocal removal on or off via the Rave 3 control panel, but you cannot adjust the level.
Why are there still a lot of the original vocals in the song after turning on AI vocal removal on the Rave 3 control panel?
1. The Rave 3 control panel only supports turning AI vocal removal on or off; it does not allow you to adjust the level.
2. Use the AI vocal removal button on the wireless mic to adjust the level. You can also adjust the vocal removal level in the app.
With the AI vocal removal function set to 100%, why is the original vocal still present?
To ensure that the accompaniment of most songs remains undistorted when the vocal removal function is activated, Rave 3 retains a slight amount of the original vocals, making the sound more natural, balanced, and authentic.
What is Auracast and does Rave 3 support it?
Auracast can link two or more Auracast-compatible Bluetooth speakers with one click. To pair multiple Rave 3 speakers, simply power on each one and press the Auracast button. A prompt sound will indicate successful pairing.
1. When connecting two Rave 3 speakers with Auracast, they support left and right channels. Double-click the Auracast button on any unit to switch between left and right channel output.
2. When connecting three or more units via Auracast, Rave 3 will output in mono mode.
How can I extend the battery life?
Here are some tips on how to improve the battery life of Rave 3:
1. Do not completely discharge the battery before recharging.
2. Recharge the battery as soon as possible when the low-battery indicator is on.
3. Stop charging once the battery is fully charged (to minimize re-charging cycles).
4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures.
5. Recharge the speaker regularly (once every 3 months) if it is not used for a prolonged period.
