PartyCast wirelessly synchronizes your music across an almost unlimited number of PartyCast-compatible speakers. 

To pair speakers together, follow the steps listed below.

PartyCast - Primary Speaker

1. Turn on Flare 2 and connect it to your phone via Bluetooth.
2. Once connected, press and hold the Bluetooth button for at least 3-5 seconds until it begins flashing white, you will hear a sound at the same time.
3. Connect additional speakers using the instructions below. The light on the primary speaker will flash at all times.

PartyCast - Secondary Speaker

1. Turn on Flare 2.
2. Press and hold the Bluetooth button for at least 3-5 seconds. You will hear a sound and the light will flash white and then turn solid, it will take 2-5 seconds.
3. Once the Bluetooth light turns solid white, the speaker is successfully connected.

Note: Avoid having any electronic devices between the two speakers and make sure the distance between the two speakers is not greater than 5 meters.

If you have additional questions, please contact us at service@soundcore.com for further assistance.