Can I use Life A1's earbuds in mono mode and how do I switch between the stereo and mono mode?
Yes, simply remove one earbud from the charging case while the other is charging. If the earbud has not previously been connected to your device, manually select the earbud from the list of available devices to pair.
On how to switch between the stereo and mono mode, please try the following steps:
When connecting to a mobile device for the first time, the right side is the primary earbud by default, and the left side is the secondary earbud. The primary earbud connects with your device and transfers signals to the secondary earbud (including after resetting).
Ways to switch:
1. Place either earbud into the charging case. You can keep using the other one.
2. If either one of the earbuds is out of battery and powered off, then you can still use the other earbud.
3. If you want to switch back to stereo mode, just take the other earbud out of the charging case to automatically enter stereo mode. If this fails, forget the Bluetooth pairing record on your device, reset the earbuds via the following steps and try again.
- Place the earbuds into the charging case and make sure they are being charged.
- Press and hold the button on both earbuds in the case for 8 seconds. The LED indicators will flash red 3 times and then turn white.
If you have additional questions, please contact us at service@soundcore.com for further assistance. Make sure to mention that you have tried the steps in this FAQ so our agents do not ask you to repeat them.
On how to switch between the stereo and mono mode, please try the following steps:
When connecting to a mobile device for the first time, the right side is the primary earbud by default, and the left side is the secondary earbud. The primary earbud connects with your device and transfers signals to the secondary earbud (including after resetting).
Ways to switch:
1. Place either earbud into the charging case. You can keep using the other one.
2. If either one of the earbuds is out of battery and powered off, then you can still use the other earbud.
3. If you want to switch back to stereo mode, just take the other earbud out of the charging case to automatically enter stereo mode. If this fails, forget the Bluetooth pairing record on your device, reset the earbuds via the following steps and try again.
- Place the earbuds into the charging case and make sure they are being charged.
- Press and hold the button on both earbuds in the case for 8 seconds. The LED indicators will flash red 3 times and then turn white.
If you have additional questions, please contact us at service@soundcore.com for further assistance. Make sure to mention that you have tried the steps in this FAQ so our agents do not ask you to repeat them.
23 undefined
A3922 Life Dot 2 Quick Start Guide
A3922 Life Dot 2 DOC
A3922 Life Dot 2 User Manual
A3927 Life A1 DOC
A3927 Life A1 Quick Start Guide
A3927_Life_A1_Manual
View More
How to Clean Your Headphones
Life A1 True Wireless Earbuds
How to Fix a Power On/Off Issue on Life A1
How to Control Life A1
How to Pair Life A1 with Another Device
How to Adjust EarWings and EarTips for Life A1
View More
