How do I turn on AeroClip?

Open the charging case lid. The LED indicator will stay on for 2 seconds and then start flashing, indicating that AeroClip is on and in pairing or reconnection mode.

Note: Remove the insulation film before using AeroClip for the first time.

 

How do I turn off AeroClip?

Place the earbuds back into the charging case and close the lid. The LED indicator will stay on for 2 seconds and then turn off, indicating that AeroClip is powered off.

 

How do I pair AeroClip with devices?

1. Upon first power-on, AeroClip automatically enters pairing mode without any extra steps. Just remove the insulation film, place the earbuds into the charging case, close the lid, and then reopen it to power on the earbuds.

2. After powering off by placing the earbuds into the charging case, reopening the case will automatically reconnect AeroClip to the last paired device.

 

How do I use Dual Connections on AeroClip?

1. Dual Connections is enabled by default on AeroClip. You can turn it on or off, or disconnect devices through the settings in the soundcore app.

2. The earbuds enter pairing mode once powered on. After connecting to the first device, place them in the case and press the case button for 3 seconds to re-enter pairing mode. The LED indicator on the case will flash rapidly, allowing you to connect to a second device.

 

How does Dual Connections work?

With both your smartphone and computer connected to the earbuds, the earbuds will play audio from the device that starts playback last. For example, if your computer starts playing music first and then your smartphone starts playing audio, the earbuds will switch to the smartphone and pause the computer's audio.

Note: Due to compatibility issues, notification sounds may be mistaken as audio and can override the playback.

 

How do I control music with AeroClip?

1. Triple-tap the touch control area to skip to the next track.

2. Double-tap the touch control area to play or pause.

3. The controls can be customized in the soundcore app.

 

How do I manage calls with AeroClip?

1. Double-tap the touch control area to answer an incoming call.

2. Double-tap the touch control area to hang up during a call.

3. Triple-tap the touch control area to reject an incoming call.

4. If connected to two phones, and Phone A is on a call while Phone B receives a call, double-tap to hang up Phone A and answer Phone B, or triple-tap to reject the call on Phone B.

 

How do I adjust the volume using tap controls?

Volume adjustment via tap controls is disabled by default. You can enable it by customizing the tap controls in the soundcore app.

 

Does AeroClip support voice assistants?

The feature is disabled by default. Enable it through the Controls settings in the soundcore app.

 

How do I reset AeroClip?

Place the earbuds in the charging case and leave the lid open. Press and hold the case button for 10 seconds until the light turns red. It will flash red three times and then flash white, indicating a successful reset.

 

How long does AeroClip turn off if I don't use it?

If not connected to any Bluetooth device, the earbuds will automatically power off after 30 minutes. You can customize this power-off time in the soundcore app.

 

What do the indicator lights mean for powering on/off and Bluetooth status?

1. Power On: When you open the case, the LED indicator turns on for 3 seconds.

2. Power Off: When you close the case, the LED indicator turns on for 3 seconds.

3. Bluetooth Pairing Mode: The white light flashes every second.

4. Bluetooth Pairing Successful: The white light stays on for 3 seconds, then turns off.

5. Bluetooth Disconnected: You'll hear a disconnection tone, and there will be no light indication.

6. Bluetooth Reconnected: You'll hear a prompt tone, and there will be no light indication.

 

What do the indicator lights mean for battery level?

1. Charging: The white light breathes every 2 seconds (this may be interrupted by other actions).

2. Fully Charged: The white light stays on for 10 seconds, then turns off.

3. Battery Life Notifications: You'll hear a notification when the battery has 30 minutes remaining, and again at 15 minutes.

 

How long does AeroClip's battery last?

The battery typically lasts about 8 hours with continuous music playback at 50% volume using the default soundcore Signature sound effect.

However, battery life can vary based on the audio content and volume. The higher the volume, the shorter the battery life.

Note: Enabling additional features in the app, like changing sound effects, may reduce the battery life.

 

How do I turn off AeroClip's prompts?

The tap prompt tone and low battery tone can be turned on or off in "More Settings" in the soundcore app.

 

What sound effects does AeroClip support?

By default, AeroClip uses the soundcore Signature.

Additional sound effects available in the soundcore app include Bass Booster, Volume Booster, Classical, Podcast, Treble Booster, and Custom EQ.

 

Can I expand the joints of the earbuds?

Yes, you can gently expand the joints for a more comfortable fit but do not expand it more than 5mm to avoid damaging your AeroClip. The joint is made from 0.5mm memory titanium wire and soft TPU to accommodate your ear shape and evenly distribute pressure.

 

What is the waterproof rating of AeroClip?

1. soundcore AeroClip has an IPX4 water resistance rating, meaning it can withstand light sweat and slight rain, making it suitable for exercise. However, IPX4 does not protect against submersion in water. Higher ratings like IPX7 or IPX8 are needed for such protection. To prevent damage, avoid activities that cause excessive sweating while using the earbuds.

 

2. After exercise, if there's moisture or sweat on the earbuds, clean them before returning them to the charging case.

 

Why does the battery life decrease over time?

Battery health naturally declines with prolonged use of electronic devices, leading to shorter battery life. To help slow down this process, avoid letting the battery drop below 20% or waiting until it completely depletes before charging the earbuds and case. Additionally, charge the earbuds and case at least once a month to prevent over-discharging the battery.

If you encounter any other issues or your issue has not been resolved, please contact us for further assistance.