<div class="基本文本框架" id="_idContainer016">
soundcore V30i User Guide (A3873)

APP

<img class="_idGenObjectAttribute-1" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links.png"></img>

Download the soundcore app to adjust EQ settings, update firmware, and explore more.

If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.

Click this link to download: http://dl-soundcore.soundcore.com/qcdl?flow=soundcore

OVERVIEW

<img class="_idGenObjectAttribute-2" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links1.png"></img>

1. Earhook

2. Touch Control Area

3. USB-C Charging Port

4. Reset Button

5. LED Indicator

WEARING

<img class="_idGenObjectAttribute-3" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links2.png"></img>

Pick up the earbuds from the charging case, then rotate the ear hooks along the auricle of your ear to achieve proper positioning.

CHARGING

<table class="基本表" id="table001"><colgroup><col class="_idGenTableRowColumn-1"></col></colgroup><tbody><tr class="基本表 _idGenTableRowColumn-2"><td colspan="1" rowspan="1" class="基本表 CellOverride-1">
			Remember to tear off the protective films on the earbuds before first use.
			</td></tr></tbody></table>

<img class="_idGenObjectAttribute-4" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links3.png"></img>

1.Place the earbuds in the charging case and close it.

•Fully dry off the earbuds and the USB-C charging port before charging.

2. Connect the charging case to a power supply by using a certified USB-C charging cable.

Low Battery Indication

Earbuds: You will hear a voice prompt of battery running low.

Charging case: The LED indicator will light up in red for 3 seconds and then go off.

POWERING ON &amp; PAIRING

<img class="_idGenObjectAttribute-5" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links4.png"></img>

Open the charging case, the earbuds will automatically power on and enter Bluetooth pairing mode. Select &quot;soundcore V30i&quot; on your device&#39;s Bluetooth list to connect. When pairing, the LED indicator on the charging case will start flashing. After the pairing is successful, the LED indicator on the charging case will stay on for 3 seconds and then go off.

Once connected successfully, they&#39;ll automatically reconnect to your device every time you open the charging case, as long as you haven&#39;t deleted the pairing history from your device.

TOUCH CONTROLS

<img class="_idGenObjectAttribute-6" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links5.png"></img>

<table class="基本表 TableOverride-1" id="table002"><colgroup><col class="_idGenTableRowColumn-3"></col><col class="_idGenTableRowColumn-4"></col><col class="_idGenTableRowColumn-5"></col><col class="_idGenTableRowColumn-6"></col></colgroup><tbody><tr class="基本表 _idGenTableRowColumn-7"><td colspan="2" rowspan="1" class="基本表 CellOverride-2"> </td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			TWS mode 
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Mono mode
			</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="3" class="基本表 CellOverride-4 _idGenCellOverride-1">
			<img class="_idGenObjectAttribute-7" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/1.png"></img>
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Play / Pause
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Touch twice (R)
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Touch twice
			</td></tr><tr class="基本表 _idGenTableRowColumn-9"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Previous track
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Customize in soundcore app
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			/
			</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Next track
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Touch twice (L)
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			/
			</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="2" class="基本表 CellOverride-2">
			<img class="_idGenObjectAttribute-8" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/2.png"></img>
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Answer / End a call
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Touch twice (L/R)
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Touch twice (L/R)
			</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Reject a call
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Touch and hold for 2 seconds (L/R)
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Touch and hold for 2 seconds
			</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-2">
			<img class="_idGenObjectAttribute-9" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/3.png"></img>
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Volume up
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			*Enable in soundcore app
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			/
			</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-2">
			<img class="_idGenObjectAttribute-10" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/4.png"></img>
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Volume down
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			*Enable in soundcore app
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			/
			</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-2">
			<img class="_idGenObjectAttribute-11" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/5.png"></img>
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Activate voice assistant
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			*Enable in soundcore app
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			*Enable in soundcore app
			</td></tr></tbody></table>

POWERING OFF

<img class="_idGenObjectAttribute-12" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links6.png"></img>

To power off, return the earbuds to the charging case and close it.

<table class="基本表" id="table003"><colgroup><col class="_idGenTableRowColumn-10"></col></colgroup><tbody><tr class="基本表 _idGenTableRowColumn-11"><td colspan="1" rowspan="1" class="基本表 CellOverride-5">
			The earbuds will automatically power off after 30 minutes if they are not connected. The duration can be customized in the soundcore app.
			</td></tr></tbody></table>

RESET

<img class="_idGenObjectAttribute-13" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links7.png"></img>

Reset if the earbuds have issues pairing with each other or with other devices.

Delete the pairing history from your Bluetooth device first. Place the earbuds in the charging case and leave the case open. Press and hold the reset button on the charging case for 10 seconds until the LED indicator on the charging case flashes red three times. At this time, your earbuds have been successfully reset.

FIRMWARE UPDATE

<img class="_idGenObjectAttribute-14" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/A3873_图片links8.png"></img>

You will be informed once a new firmware version is detected when you connect the earbuds to the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is complete. During the update, ensure the earbuds are being charged and avoid any usage.

SPECS

Specifications are subject to change without notice.

<table class="基本表 TableOverride-1" id="table004"><colgroup><col class="_idGenTableRowColumn-12"></col><col class="_idGenTableRowColumn-13"></col></colgroup><tbody><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Input
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			5V <img class="_idGenObjectAttribute-15" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/6.png"></img> 1A
			</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Output
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			5V <img class="_idGenObjectAttribute-15" alt="" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_EN/image/6.png"></img> 0.3A (0.15A per port)
			</td></tr><tr class="基本表 _idGenTableRowColumn-15"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Battery capacity
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			70mAh × 2 (earbuds);

			500mAh (charging case)
			</td></tr><tr class="基本表 _idGenTableRowColumn-15"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Charging time
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			2 hours (earbuds);

			2 hours (charging case)
			</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Driver unit
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			14.2mm dynamic driver
			</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Frequency response
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			20 Hz - 20 kHz
			</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Impedance
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			11Ω
			</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Waterproof rating (earbuds)
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			IPX5
			</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Bluetooth version
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			5.3
			</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Bluetooth range
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			10 m / 33 ft
			</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			Maximum volume
			</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
			88dB
			</td></tr></tbody></table>
</div>

soundcore V30i User Guide (A3873)

<div class="基本文本框架" id="_idContainer016">
			soundcore V30i 用户使用指南（A3873）
			应用程序
			<img class="_idGenObjectAttribute-1" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links.png" alt=""></img>
			下载 soundcore 应用程序以调节 EQ 设置，更新固件，及探索更多精彩功能。
			如果您的耳机无法连接 soundcore 应用程序，请重新安装应用程序，或在您的移动应用程序商店中将其更新到最新版本。
			您也可以点击链接下载应用程序： http://dl-soundcore.soundcore.com/qcdl?flow=soundcore
			产品概览
			<img class="_idGenObjectAttribute-2" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links1.png" alt=""></img>
			1. 耳挂
			2. 触控区域
			3. USB-C 充电端口
			4. 重置按钮
			5. LED 指示灯
			佩戴指引
			<img class="_idGenObjectAttribute-3" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links2.png" alt=""></img>
			轻轻将耳机沿着耳朵上缘挂上，再慢慢旋转耳挂，调整到最贴合舒适的位置。
			充电
			<table class="基本表" id="table001"><colgroup><col class="_idGenTableRowColumn-1"></col></colgroup><tbody><tr class="基本表 _idGenTableRowColumn-2"><td colspan="1" rowspan="1" class="基本表 CellOverride-1">
							首次使用前请撕掉耳机上的绝缘贴纸。
						</td></tr></tbody></table>
			<img class="_idGenObjectAttribute-4" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links3.png" alt=""></img>
			1. 将耳机放入充电盒，并关闭充电盒盖。
			• 在充电前请确保耳机和 USB-C 充电端口完全干燥。
			2. 使用随包装盒附赠的 USB-C 充电线将充电盒连接至电源。
			低电量提示
			耳机：当耳机电量低时，您会听到语音提示。
			充电盒：LED 灯闪烁红灯 3 秒后熄灭
			开机 &amp; 配对
			<img class="_idGenObjectAttribute-5" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links4.png" alt=""></img>
			撕掉绝缘贴纸后将耳机放回充电盒，关上盒盖。重新打开充电盒后，耳机将自动开机并进入蓝牙配对模式。在设备的蓝牙列表中选择&quot;soundcore V30i&quot; 进行连接。配对时，充电盒上的 LED 指示灯将开始闪烁。配对成功后，LED 指示灯将长亮 3 秒钟，然后熄灭。
			一旦配对成功，只要手机不删除配对记录，耳机将在后续开盖时自动回连设备。
			触摸控制
			<img class="_idGenObjectAttribute-6" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links5.png" alt=""></img>
			<table class="基本表 TableOverride-1" id="table002"><colgroup><col class="_idGenTableRowColumn-3"></col><col class="_idGenTableRowColumn-4"></col><col class="_idGenTableRowColumn-5"></col><col class="_idGenTableRowColumn-6"></col></colgroup><tbody><tr class="基本表 _idGenTableRowColumn-7"><td colspan="2" rowspan="1" class="基本表 CellOverride-2"></td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							双耳模式
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							单耳模式
						</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="3" class="基本表 CellOverride-4 _idGenCellOverride-1">
							<img class="_idGenObjectAttribute-7" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/1.png" alt=""></img>
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							播放/暂停
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							轻触两下（右）
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							轻触两下
						</td></tr><tr class="基本表 _idGenTableRowColumn-9"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							上一曲
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							*在 soundcore 应用程序中设置
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							/
						</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							下一曲
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							轻触两下（左）
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							/
						</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="2" class="基本表 CellOverride-2">
							<img class="_idGenObjectAttribute-8" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/2.png" alt=""></img>
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							接电话/挂电话
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							轻触两下（左/右）
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							轻触两下（左/右）
						</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							拒接来电
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							长按 2 秒（左/右）
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							长按 2 秒
						</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-2">
							<img class="_idGenObjectAttribute-9" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/3.png" alt=""></img>
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							调高音量
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							*在 soundcore 应用程序中设置
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							/
						</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-2">
							<img class="_idGenObjectAttribute-10" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/4.png" alt=""></img>
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							调低音量
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							*在 soundcore 应用程序中设置
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							/
						</td></tr><tr class="基本表 _idGenTableRowColumn-8"><td colspan="1" rowspan="1" class="基本表 CellOverride-2">
							<img class="_idGenObjectAttribute-11" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/5.png" alt=""></img>
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							激活语音助手
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							*需在 soundcore 应用程序中设置
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							*需在 soundcore 应用程序中设置
						</td></tr></tbody></table>
			关机
			<img class="_idGenObjectAttribute-12" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links6.png" alt=""></img>
			将耳机放回充电盒并关闭充电盒盖，耳机会自动关机。
			<table class="基本表" id="table003"><colgroup><col class="_idGenTableRowColumn-10"></col></colgroup><tbody><tr class="基本表 _idGenTableRowColumn-11"><td colspan="1" rowspan="1" class="基本表 CellOverride-1">
							如果耳机在盒外且没有成功连接蓝牙，它们将在 30 分钟后自动关机，自动关机时间可以在 soundcore 应用程序中设置。
						</td></tr></tbody></table>
			重置设备
			<img class="_idGenObjectAttribute-13" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links7.png" alt=""></img>
			如果耳机在与其他设备配对时出现问题，请重置耳机。
			首先从您的蓝牙设备中删除配对历史。将耳机放入充电盒并保持开盒状态。长按充电盒后方的重置按钮 10 秒钟，直到充电盒上的 LED 指示灯闪红灯 3 次，即重置成功。
			固件更新
			<img class="_idGenObjectAttribute-14" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/A3873_图片links8.png" alt=""></img>
			当您将耳机连接到应用程序时，一旦检测到新的固件版本，您将收到通知。确保将耳机放入充电盒中，并保持盒子打开，直到固件更新完成。更新过程中，请确保耳机在充电状态且勿进行任何操作。
			产品参数
			产品参数如有变更，恕不另行通知。
			<table class="基本表 TableOverride-1" id="table004"><colgroup><col class="_idGenTableRowColumn-12"></col><col class="_idGenTableRowColumn-13"></col></colgroup><tbody><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							输入电流
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							5V <img class="_idGenObjectAttribute-15" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/6.png" alt=""></img> 1A
						</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							输出电流
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							5V <img class="_idGenObjectAttribute-15" src="https://salesforce-knowledge.s3.us-west-2.amazonaws.com/A3873_UG_V01_SC/image/6.png" alt=""></img> 0.3A（每端 0.15A）
						</td></tr><tr class="基本表 _idGenTableRowColumn-15"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							电池容量
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							70mAh × 2（耳机）;
							500mAh（充电盒）
						</td></tr><tr class="基本表 _idGenTableRowColumn-15"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							充电时长 
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							2 小时（耳机）；
							2 小时（充电盒）
						</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							驱动单元
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							14.2 毫米动圈扬声器
						</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							频率范围
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							20 Hz - 20 kHz
						</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							阻抗
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							11Ω
						</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							防水等级（耳机）
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							IPX5
						</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							蓝牙版本
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							5.3
						</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							蓝牙范围
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							10 米
						</td></tr><tr class="基本表 _idGenTableRowColumn-14"><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							最大音量
						</td><td colspan="1" rowspan="1" class="基本表 CellOverride-3">
							88 分贝
						</td></tr></tbody></table>
		</div>

soundcore V30i 用户使用指南（A3873）

Soundcore V30i 取扱説明書 (A3873)

A3873 soundcore V30i QSG

EU&UK Declaration of Conformity for soundcore V30i

How to Reset Your soundcore Headphones

Guide to Locating the Serial Number (SN) of Your soundcore Headphones

Choosing the Right soundcore Open-Ear Earbuds with Ear Hooks: A Comparison Guide

How to Maintain and Care for soundcore Headphones

How to Fix soundcore V30i Earbuds One-Sided Issues

How to Re-Pair V30i with the Existing Device or Pair a New Device

soundcore V30i Headphones FAQ

Battery and Charging Overview of V30i Headphones

How to Improve Call Quality and Voice Clarity with V30i

How to Turn off V30i Earbuds

How to Fix Low Volume Issues on V30i

How to Fix Constantly Disconnecting or Interrupted Issues on V30i Earbuds

How to Troubleshoot V30i Earbuds That Won't Pair with Your Phone

How to Wear soundcore V30i Correctly and Comfortably

How to Fix One-Sided Sound Issues on V30i

How to Improve the Sound Quality of V30i

What about Sound Leakage in V30i Earbuds

How to Address Accidental Triggers and Unresponsive Touch Controls on V30i

soundcore Open-Ear Headphones: Dive Into Music, Embrace the World

How to Resolve Charging Issues with V30i Earbuds and Charging Case

How to Select Audio Input and Output on a Windows Computer When Using V30i

How to Resolve Delay Issues Between V30i Earbuds and Device

How to Maintain and Care for soundcore V30i

V30i

Soundcore

 soundcore AeroClip | Sound Out in Style

Liberty 5 | 2x Stronger Voice Reduction

soundcore Rave 3S | The Most Powerful Al Party Speaker: Buy Two, Enjoy $100 Off

{"EN":"Log in to view more information."}

{"EN":"Log in to view your service history."}

{"DE":"Suchen","EN":"Search","FR":"Recherche"}

{"DE":"E-Mail","EN":"Email","FR":"E-mail"}

{"DE":"Antragsdatum","EN":"Application date","FR":"Date de la demande"}

{"DE":"Zurücksetzen","EN":"Reset","FR":"Réinitialiser"}

{"DE":"Erfahren Sie mehr","EN":"Learn More","FR":"En savoir plus"}

{"DE":"Kontaktieren Sie uns","EN":"Contact us","FR":"Contactez-nous"}

{"DE":"Zurückziehen","EN":"Retract","FR":"Rétracter"}

{"DE":"Bestellnummer","EN":"Order Number","FR":"Numéro de commande"}

{"EN":"Refund will be issued to the original payment method"}

{"DE":"Erweitern","EN":"Expand","FR":"Développer"}

{"DE":"Kopieren","EN":"Copy","FR":"Copier"}

{"DE":"Selbstbedienung","EN":"Self-Service","FR":"Auto-assistance"}

{"DE":"Übersicht","EN":"Summary","FR":"Résumé"}

{"DE":"Ihre Bestellungen","EN":"Your Orders","FR":"Vos commandes"}

{"DE":"Verfolgen Sie Ihre Bestellung","EN":"Track Your Order","FR":"Suivez votre commande"}

{"DE":"Sendungsnummer","EN":"Tracking Number","FR":"Numéro de suivi"}

{"DE":"Bestätigungscode","EN":"Verification Code","FR":"Code de vérification"}

{"DE":"Verfolgen","EN":"Track","FR":"Suivre"}

{"DE":"Versandt","EN":"Shipped","FR":"Expédié"}

{"DE":"Nicht versandt","EN":"Unshipped","FR":"Non expédié"}

{"EN":"These are your orders from our official website."}

{"DE":"Brauchen Sie Hilfe?","EN":"Need Help?","FR":"Besoin d’aide ?"}

{"EN":"Verify your devices warranty coverage."}

{"EN":"Find troubleshooting guides and solutions."}

{"EN":"Please specify the type of service you require."}

{"EN":"We will notify you when it has been sent"}

{"DE":"Kopiert","EN":"Copied","FR":"Copié"}

{"EN":"Learn more about our contact information"}