This article will show you how to reset soundcore P40i.

1. Place the earbuds into the charging case and ensure that the case remains open.

2. Press and hold the button on the back of the charging case for 10 seconds. Keep holding until the LED indicator on the charging case flashes white rapidly three times. This confirms a successful reset.

It's important to note that when resetting the earbuds, they should be properly connected to the charging case. To ensure a successful reset, make sure that when the left earbud is put into the case, the left LED of the charging case lights up white, and when the right earbud is put into the case, the right LED of the charging case lights up white, indicating that the earphones are in good contact with the charging pins.

If the LED indicator on the charging case does not light up, please check the following:

1. Ensure that the charging case and earbuds are firmly connected.

2. Confirm that both the charging case and the earbuds have sufficient power.

3. Clean the charging pins using a dry cloth to remove any dirt or debris that may hinder the charging process.