What's in the box?
Motion 100 Speaker
60 cm USB-C to C Cable
Quick Start Guide
Note: Wall charger not included.
What's the playtime of Motion 100?
Motion 100 supports up to 12 hours of playtime at 50% volume and with BassUp and button lights turned off. The battery life will be affected by the content being played, custom EQs, volume level, etc.
Is Motion 100 waterproof?
Motion 100 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover is sealed tightly.
What charger I should use to charge Motion 100?
Any charger that delivers at least 5V/2A.
How long does it take to charge Motion 100?
About 5 hours.
How do I reset Motion 100?
Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5-10 seconds. You'll hear a prompt and the speaker will automatically restart.
What's the output power of Motion 100?
20W
What does the BassUp button do?
The BassUp button turns BassUp technology on or off. BassUp technology intensifies bass for a more powerful listening experience.
Does a single Motion 100 support stereo sound?
Yes. But you'll get a better stereo experience if you pair two Motion 100s via TWS.
What Bluetooth version does Motion 100 use?
Bluetooth 5.3.
Which Bluetooth codecs does Motion 100 support?
Motion 100 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
What is LDAC and why don't I see the LDAC option?
LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec.
LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
How do I access and use the LDAC function?
Ensure your phone runs Android 8.0 or higher, then perform the following steps to enable LDAC:
1. Open the Soundcore app
2. Go to ""Settings""
3. Click on ""Sound Mode""
4. Select ""Preferred audio quality"" to switch to LDAC.
Notes:
- The proces may take about 10 seconds, or require you to update the speaker's firmware. Do not use the app or speaker while updating the firmware.
- LDAC provides higher quality music, but it will increase power consumption and reduce playtime.
- Make sure you use LDAC in a low interference environment to ensure a stable connection.
Does Motion 100 support Partycast?
No.
What is True Wireless Stereo (TWS)?
TWS allows two identical TWS speakers to pair up and play in stereo. Motion 100 supports TWS.
How do I pair two Motion 100 speakers via TWS?
Method 1
1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers.
2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
5. The primary speaker is the one with the blue light.
6. Use the primary speaker to pair with your device.
Method 2
1. Long press the power button to turn on both speakers.
2. Connect either speaker with your Bluetooth device.
3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
How does the stereo sound work when two Motion 100s are paired? The primary speaker in the stereo pair (the speaker connected to the phone via Bluetooth) serves as the left channel while the secondary speaker serves as the right channel.
