This article will show you how to reset soundcore Liberty 4 NC.

1. Place the earbuds into the charging case and ensure that the case remains open.

2. Press and hold the button on the charging case for 10 seconds. Keep holding until the LED indicators inside the charging case flash white rapidly three times. This confirms a successful reset.

It's important to note that when resetting the earbuds, they should be properly connected to the charging case. To ensure a successful reset, make sure that the left and right earbuds are placed correctly inside the charging case, and you should see white LED indicators, indicating a proper connection.

If the LED indicators in the charging case do not light up, please check the following:

1) Ensure that the charging case and earbuds are firmly connected.

2) Confirm that both the charging case and the earbuds have sufficient power.

3) Clean the charging pins using a dry cloth to remove any dirt or debris that may hinder the charging process.

If you encounter any other issues or your issue has not been resolved, please contact us for further assistance.