If you're struggling to get enough volume from your soundcore P40i earbuds when connected to your Mac, don't worry! There are some tips to increase the volume and improve your listening experience. In this article, we'll explore some of the most effective methods to boost the volume on your soundcore P40i earbuds when connected to a Mac.

To fix this issue, please try the steps below:

1. Make sure the charging case has enough power and reset the earbuds as per the steps below:

  * Place the earbuds into the charging case and ensure that the case remains open.

  * Press and hold the button on the back of the charging case for 10 seconds. Keep holding until the LED indicator on the charging case flashes white rapidly three times. This confirms a successful reset.

2. Clear all the pairing records on your Mac computer and re-pair your earbuds. Turn the volume down one notch on your Mac computer. Then turn up the volume of both your Mac computer and earbuds with the music/video set to maximum volume.

3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.

If you have any more issues or your issue has not been resolved, please contact us for further assistance.