Stereo pairing only works between 2 speakers at most, and you would need to pair two identical speakers at the same time to create a stereo sound that distinguishes the L (left) and the R (right) channel separately.
To pair two Soundcore 2 speakers together, follow the steps listed below.
Turn on both speakers.
Hold the Bluetooth button on both speakers for a few seconds to enter the TWS mode (both speakers will show a flashing blue indicator)
Wait for about 5-8 seconds, and you will hear a 'beep' sound. This means both speakers are paired successfully. (You won't be able to hear the sound on some speaker models if you turn off the voice prompt feature in the Soundcore App)
When both speakers have successfully paired, the primary speaker's Bluetooth indicator will flash blue slowly and the secondary speaker's Bluetooth indicator will show solid blue.
Pair your Bluetooth device with the primary speaker and the indicator will turn solid blue after it is successfully paired.
Here is a video for your reference.
Note: Avoid having any electronic devices between both speakers, and make sure the distance between the two speakers is not greater than 5 meters.
If you have additional questions, please contact us at service@soundcore.com for further assistance. Make sure to mention that you have tried the steps in this FAQ so our agents do not ask you to repeat these steps.
