Stereo pairing only works between 2 speakers at most, and you would need to pair two identical speakers at the same time to create a stereo sound that distinguishes the L (left) and the R (right) channel separately.

To pair two Soundcore Motion+ speakers together, follow the steps listed below.
 

1.Turn the two speakers on.

2. Press the bluetooth button on both speakers at the same time for 5-8seconds until the bluetooth light turns flash white.

3. Release the bluetooth button for both speakers and then 2 speakers will pair with each other automatically in 5s. the primary speaker is one whose Bluetooth indicator light is off, while the secondary speaker has a solid white Bluetooth indicator light.

4. Then, pair your Bluetooth device with your primary speaker by hitting the speaker's Bluetooth button once.

Note: Avoid having any electronic devices between both speakers, and make sure the distance between the two speakers is not greater than 5 meters.

If you have additional questions, please contact us at service@soundcore.com for further assistance. Make sure to mention that you have tried the steps in this FAQ so our agents do not ask you to repeat these steps.