Troubleshooting for Error 19 on L70 Hybrid
First of all, please confirm the details below:
- Whether your vacuum can still run and clean the floors despite the error
- If the issue happens at the same place, which might be related to the actual situation, please send us a picture of the surroundings
- Let us know whether the lidar spins while the vacuum is working.
Then you can try the following:
- Clean the laser sensors (lens) with a clean dry cloth and get any small debris out with a manual vacuum if possible.
- Tap the white laser sensor cover with a eufy logo on it several times to make sure the cover can spring back and nothing gets stuck in the lidar section. Lift the cover a little bit to see if it helps.
- Power off by holding the start button until you hear the voice alert, after 5 minutes, turn it back on by holding the start button.
- If the above does not help, you can reset the vacuum to the factory settings.
If you need any further assistance, please contact us.
- Whether your vacuum can still run and clean the floors despite the error
- If the issue happens at the same place, which might be related to the actual situation, please send us a picture of the surroundings
- Let us know whether the lidar spins while the vacuum is working.
Then you can try the following:
- Clean the laser sensors (lens) with a clean dry cloth and get any small debris out with a manual vacuum if possible.
- Tap the white laser sensor cover with a eufy logo on it several times to make sure the cover can spring back and nothing gets stuck in the lidar section. Lift the cover a little bit to see if it helps.
- Power off by holding the start button until you hear the voice alert, after 5 minutes, turn it back on by holding the start button.
- If the above does not help, you can reset the vacuum to the factory settings.
If you need any further assistance, please contact us.
Troubleshooting for Error 19 on L70 Hybrid
0 undefined
EU Declaration of Conformity for soundcore A3i_A3992
A3961 QSG V2(1)
UK&CA Declaration of Conformity for soundcore Liberty 4_A3953
EU Declaration of Conformity for soundcore Liberty 4_A3953
A3947_Liberty 4 NC_QSG
Liberty 4_A3953_QSG
View More
How to use Liberty 4 Wellness features
How to Wear Liberty 4 and Change Eartips
How to Pair and Reset Sport X10
How to solve a connection issue on Sleep A10
How to Connect to the Soundcore App and Update Firmware for Sport X10
How to Use Features On the Soundcore App for Sport X10
View More
