To help you install the entry sensor on either window or door.
Choose Desired Location
1. Find an ideal location where you want to monitor.
For example, installing it on a wall or window frame. Mark the location bottom if possible.
2. Place the sensor’s main part and its magnet part at the desired location, and then check if the window/door can be open/closed.
Please make sure the gap between the two components is less than 4 cm when the door/window is closed.
Mount the Entry Sensor
1. Peel off the adhesive film from the 3M tape.
2. Stick both parts of the sensor onto the desired location.
Please make sure the magnet part is directly adjacent to the “Magnet” silk printing.
If you have any questions, please contact us for further assistance.












