Here are the steps to use the Ozone Purification feature:

1. Install the front cover and place the vacuum cleaner on a flat surface.

2. Press the Ozone button twice to start ozone purification. At full power, ozone purification can work about 15 times.

3. The vacuum cleaner will automatically stop ozone purification after 20 minutes.

Notes:

• Please confirm if the vacuum ever sucked water and whether the filters are completely dry and clean

• After the Ozone feature is enabled, make sure space is sealed (i.e. If the HomeVac H11 Pure is purifying in a car, make sure all the doors and windows are closed.) Also, make sure no human beings or pets, etc. are in the space after the Ozone Purification feature is enabled since it’s dangerous to go into a sealed space that is with Ozone airs. Be assured it will be safe to get into the space 30 mins after the purifying has been done.  
• The suction feature and ozone purification feature can not work at the same time.

• You can use the Ozone function about 15 times after HomeVac H11 Pure is fully charged.

If you have any questions regarding the Ozone feature, please contact us.