Stereo pairing only works between 2 speakers at most, and you would need to pair two identical speakers at the same time to create a stereo sound that distinguishes the L (left) and the R (right) channel separately.

To pair two Soundcore Flare+  speakers together, follow the steps listed below.

1. Turn both of the speakers on.
2. Hold the Bluetooth button on both the speakers for a few seconds simultaneously until the bluetooth indicator light flashes white rapidly.
3. Wait for 5-8s, you will hear a "tone" when the two speakers are paired together successfully.
Normally, when the two Soundcore Flare+ speakers pair together successfully, the Bluetooth indicator of the primary speaker is flashing white and the Bluetooth indicator of the sub-speaker indicator is a solid white indicator. When you connect the two speakers with a Bluetooth device to create a stereo sound successfully, then both Bluetooth indicators are the solid white indicators.

Note: Avoid having any electronic devices between both speakers, and make sure the distance between the two speakers is not greater than 5 meters.

If you have additional questions, please contact us for further assistance. Make sure to mention that you have tried the steps in this FAQ so our agents do not ask you to repeat these steps.