Details
Related Articles
Manuals & Downloads
Support Videos
General troubleshooting when RoboVacs do not connect to WiFi

First of all, please check to make sure your RoboVac has WiFi capacity.

 

You can try the general troubleshooting first:

 

1. Make sure your phone is connected to a 2.4 GHz (L60 can support 5 GHz) network first. Move the vacuum and your phone close to your router.

2. Disconnect a few other devices and try again. Make sure the name and password of your router are correct (like capital letters). 

3. Turn on the GPS and authorize the location access for your eufy Clean app in your phone settings. If there is a "precise location" option, please turn it on.

4. Enable the Airplane mode before you start connecting and turn on the WiFi only (cellular remains off all the time)

5. Press and hold the start button on the top of the vacuum for 10+ seconds until you hear a beep or "reset WiFi" voice alert. Make sure you hear the beep or "reset WiFi" voice alert. 

 

For the L70/L50/L60 series, please press and hold both 2 buttons on the vacuum top until you hear the "reset WiFi" voice alert. Make sure you hear the voice alert.

 

A slow flashing light means "ready to connect", and a quick flashing light means "connecting". Only a solid blue light means the RoboVac is "connected".

 

You can refer to the videos instructions:

 

To verify if the issue lies with the RoboVac, you could connect the RoboVac via the HotSpot of your phone. 

How to connect eufy RoboVac via a personal hotspot?

  

If you are still experiencing issues connecting RoboVac to your 2.4GHz WiFi network, please contact us for further assistance.


If possible, please provide eufy support team with the following information to resolve the issue in a timely manner:

- eufy Clean account email.

- A short video showing the WiFi setup process

General troubleshooting when RoboVacs do not connect to WiFi
Download
Applicable for those products :
Resolved
Unresolved
Copied
0 Results
Manuals & Downloads
EU Declaration of Conformity for soundcore A3i_A3992
Download
A3961 QSG V2(1)
Download
UK&CA Declaration of Conformity for soundcore Liberty 4_A3953
Download
EU Declaration of Conformity for soundcore Liberty 4_A3953
Download
A3947_Liberty 4 NC_QSG
Download
Liberty 4_A3953_QSG
Download
Q20i_QSG
Download
A6610_soundcore_Sleep_A10_QSG
Download
EU&UK Declaration of Conformity for soundcore Sleep A10_A6610
Download
A3947_Liberty 4 NC_User Manual
Download
Support Videos
How to use Liberty 4 Wellness features
How to Wear Liberty 4 and Change Eartips
How to Pair and Reset Sport X10
How to solve a connection issue on Sleep A10
How to Connect to the Soundcore App and Update Firmware for Sport X10
How to Use Features On the Soundcore App for Sport X10
How to Wear Soundcore Sport X10 Correctly
How to Pair soundcore Frames with a New Device
How to use soundcore VR P10
How to use squeeze control on Liberty 4
Contact Us