Details
Related Articles
Manuals & Downloads
Support Videos
4G Starlight Camera Installation Guide

Installing the 4G Starlight Camera

  1. The recommended installation height is 2m~3m.


 
  1. The installation angle of the device will affect its detection range. The recommended downward tilt angle is 15°(Please control the angle within 10°~30°)Increasing the downward tilt angle will reduce the detection distance. 

Note: 4G Starlight Camera is not suitable for upward elevation installation.


 

Note: The recommended downward tilt angles at different installation heights are as follows

Installation Height

2m

2.5m

3m

Recommended Downward Tilt Angle

10°

15°

20°

 
  1. Installation Tips:
  • Pay attention to the direction of the device.
  • Install the camera correctly with the lens on top and the PIR lens on the bottom.
  • Keep the PIR lens horizontal
  • Tear off the protective film on the surface of the PIR lens 


  1. For accurate motion detection, it is recommended to maintain an angle of more than 45° between the facing direction of the camera and the pedestrian walkway in the monitoring area.
 


 
  1. When installing, avoid the following scenarios:
  • Avoid glass barriers


  • Avoid facing the sun, it is easy to cause a false trigger when the sun is directly shining


  • Avoid facing the tree close by, it is easy to cause a false trigger when the tree is shaking.


  • Avoid installing it on air vents such as air conditioners, as hot wind waves can easily cause a false trigger.
 

 

Setting the Detection Sensitivity

  1. Open the device APP, enter Setting > Motion Detection > Motion Test Mode
  2. Walk left and right in front of the device
  3. Check whether the detection distance is appropriate through the device indicator light. 
  4. You can adjust the detection distance by changing the sensitivity gear.

image.png

 

Setting the Activity Zone

  1. Activity Zone avoids objects or areas that are not expected to cause a detection, such as trees, windmills, lights, roads with heavy traffic, etc.
  2. Activity Zone should cover the target detection area as much as possible, but the above-mentioned parts that are easy to be detected by mistake should be eliminated.
  3. To set the activity zone, please refer to this article: Unlock the power of eufy camera activity zones 

If there are any other questions about the 4G Starlight Camera, please contact us for further assistance.
 
4G Starlight Camera Installation Guide
Download
Applicable for those products :
Resolved
Unresolved
Copied
0 Results
Manuals & Downloads
EU Declaration of Conformity for soundcore A3i_A3992
Download
A3961 QSG V2(1)
Download
UK&CA Declaration of Conformity for soundcore Liberty 4_A3953
Download
EU Declaration of Conformity for soundcore Liberty 4_A3953
Download
A3947_Liberty 4 NC_QSG
Download
Liberty 4_A3953_QSG
Download
Q20i_QSG
Download
A6610_soundcore_Sleep_A10_QSG
Download
EU&UK Declaration of Conformity for soundcore Sleep A10_A6610
Download
A3947_Liberty 4 NC_User Manual
Download
Support Videos
How to use Liberty 4 Wellness features
How to Wear Liberty 4 and Change Eartips
How to Pair and Reset Sport X10
How to solve a connection issue on Sleep A10
How to Connect to the Soundcore App and Update Firmware for Sport X10
How to Use Features On the Soundcore App for Sport X10
How to Wear Soundcore Sport X10 Correctly
How to Pair soundcore Frames with a New Device
How to use soundcore VR P10
How to use squeeze control on Liberty 4
Contact Us